W11S series upper roll universal bending machine|Nantong Xian Machine Manufacture CO.,LTD.

W11S series upper roll universal bending machine

Performance and characteristics:
1. high precision end bending
The length of the straight edge is set freely, and the upper roller is directly pressured to pre bend, so that the high end end bending can be achieved.
2.NC control, high production efficiency
The process parameters of the rolled products are NC, and the operation is simple and the efficiency is greatly improved.
3. precision of products
The upper roll is in the shape of a drum. The lower part of the lower roll is adjusted by the supporting roll. It is continuously bent. The ideal product can be rolled in a wide range from thin plate to thick plate.
4. homework safety
Two the lower roll is fixed, the upper roll moves up and down, the left and right sides move, the workpiece does not move along with the work roll, and the operator is safe.
5. integral structure, simple foundation and easy to move.
The equipment adopts integral chassis without foundation bolts, which is simple in foundation and convenient for mobile workplaces.
6. different uses, corresponding control methods.
According to the usage, there are following control methods:
TNC (above NC): multiple varieties and small quantities of production.
T&BNC (upper and lower NC): few varieties, mass production.
7. rich curved shapes
It has a coil type O, U type, multi segment R, auxiliary cone device, and can be used for rolling a cone cone of a certain range.
Type O bending: rear bending mode
Type U bending: front bending mode:
Multi segment R bending: combined mode.

Technical parameters:

规格型号上辊加压力最大板厚板幅上辊直径下辊直径中心距电机

端曲中央驱动油油压用移动用

小型上辊万能式卷板机技术参数

8×1500 25 6 8 1500 175 125 160 3 2.2 0.75

6×2000 25 4.5 6 2000 195 125 160 3 2.2 0.75

8.5×1500 30 6.5 8.5 1500 185 125 160 3 2.2 0.75

7.5×2000 30 5.5 7.5 2000 205 125 160 3 2.2 0.75

10×1500 37 8 10 1500 205 135 180 4 2.2 0.75

8.5×2000 37 6.5 8.5 2000 220 135 180 4 2.2 0.75

8×2500 37 5.7 8 2500 235 135 180 4 2.2 0.75

11×1500 45 9 11 1500 215 135 180 4 2.2 0.75

10×2000 45 7.5 10 2000 235 135 180 4 2.2 0.75

9×2500 45 6.5 9 2500 245 135 180 4 2.2 0.75

11×2000 55 9 11 2000 245 145 200 5.5 4 0.75

10.5×2500 55 8 10.5 2500 255 145 200 5.5 4 0.75

9.5×3000 55 7 9.5 3000 275 145 200 5.5 4 0.75

12×2000 65 10 12 2000 250 145 200 5.5 4 0.75

11.5×2500 65 9 11.5 2500 265 145 200 5.5 4 0.75

10.5×3000 65 8 10.5 3000 280 145 200 5.5 4 0.75

中型上辊万能式卷板机技术参数

15×1200 75 12 15 2000 255 150 245 7.5 4 1.1

14×2500 75 10 14 2500 270 150 245 7.5 4 1.1

13×3000 75 9 13 3000 290 150 245 7.5 4 1.1

17×2500 100 13 17 2500 300 165 270 15 5.5 1.5

15×3000 100 11 15 3000 325 165 270 15 5.5 1.5

20×2500 130 16 20 2500 330 180 300 1515 5.5 2.2

18×3000 130 14 18 3000 350 180 300 18.5 5.5 2.2

22×1500 160 18 22 2500 360 200 330 18.5 7.5 2.2

20×3000 160 16 20 3000 375 200 330 18.5 7.5 2.2

18×3500 160 14 18 3500 390 200 330 22 7.5 2.2

24×2500 190 21 24 2500 380 220 360 22 7.5 4

22×3000 190 19 22 3000 400 220 360 22 7.5 4

19×3500 190 16 19 3500 410 220 360 30 7.5 4

29×2500 230 25 29 2500 410 235 380 30 11 4

27×3000 230 22 27 3000 425 235 380 30 11 4

25×3500 230 21 25 3500 440 235 380 30 11 4

33×2500 270 28 33 2500 430 250 400 30 11 4

30×3000 270 25 30 3000 450 250 400 30 11 4

28×3500 270 23 28 3500 470 250 400 30 11 4

25×4000 270 20 25 4000 490 250 400 30 11 4

36×2500 320 30 36 2500 460 260 420 37 15 5.5

32×3000 320 28 32 3000 480 260 420 37 15 5.5

28×3500 320 25 28 3500 500 260 420 37 15 5.5

26×4000 320 22 26 4000 520 260 420 37 15 5.5

39×2500 380 35 39 2500 500 275 460 45 22 5.5

35×3000 380 32 35 3000 510 275 460 45 22 5.5

32×3500 380 28 32 3500 530 275 460 45 22 5.5

30×4000 380 25 30 4000 550 275 460 45 22 5.5

43×2500 430 40 43 2500 520 290 500 55 22 7.5

38×3000 430 35 38 3000 540 290 500 55 22 7.5

36×3500 430 30 36 3500 560 290 500 55 22 7.5

32×4000 430 28 32 4000 580 290 500 55 22 7.5

< 关闭 >